Yealink SIP-T20P User Manual

Advanced Phone Features
75
 URL Record: the phone sends HTTP URL request to trigger a recording. Contact your
system administrator for the predefined URL.
Note
To configure a Record key via phone user interface:
1. Press .
2. Select Features->DSS Keys.
3. Select the desired DSS key.
4. Press or to select Key Event from the Type field.
5. Press or to select Record from the Key Type field.
6. Press to accept the change.
To configure a URL Record key via phone user interface:
1. Press .
2. Select Features->DSS Keys.
3. Select the desired DSS key.
4. Press or to select URL Record from the Type field.
5. Enter the URL (e.g. http://10.1.2.224/phonerecording.cgi) in the URL Record filed.
6. Press to accept the change.
You can also configure the Record key or URL Record key via web user interface at the
path Phone->DSS Keys.
The Record/URL Record keys control recording and are available:
 During an active call
 When calls are on hold or mute
 During a blind or attended transfer
 During a conference call
The record feature is not available on all servers. Contact your system administrator for
more information.
1. Type:
◄ Key Event ►
1. Type:
◄ URL Record ►

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g