EasyManuals Logo

Yealink SIP-T20P User Manual

Yealink SIP-T20P
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
User Guide SIP-T20P IP Phone
42
3. Enter the desired line ID in the Account field or leave it blank.
4. Click Add to add the block out number.
Public telephone networks in countries around the world have a single emergency
telephone number (emergency services number), that allows a caller to contact local
emergency services for assistance when required. The emergency telephone number
may differ from country to country. It is typically a three-digit number so that it can be
easily remembered and dialed quickly. Some countries have a different emergency
number for each of the different emergency services.
You can specify the emergency telephone numbers on the IP phone for contacting the
emergency services in an emergency situation.
Note
To specify emergency numbers via web user interface:
1. Click on Phone->Preference.
2. Enter the emergency services number in the Emergency field. For multiple numbers,
enter a ―,‖ between each emergency number.
The default emergency numbers are 112, 911 and 110.
3. Click Confirm to accept the change.
You can enable the live dialpad feature on the SIP-T20P IP phone, which enables the IP
phone to automatically dial out the phone number without pressing any other key. You
can also configure a period of time before automatically dialing out the phone number.
To enable the live dialpad via web user interface:
1. Click on Phone->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time (1~14s) in the Inter Digit Time (1~14) (seconds) field.
4. Click Confirm to accept the change.
Note
The default delay time of live dialpad is 4s.
You can configure live dialpad via web user interface only.
Contact your local phone service provider for available emergency numbers in your
area.

Table of Contents

Other manuals for Yealink SIP-T20P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T20P and is the answer not in the manual?

Yealink SIP-T20P Specifications

General IconGeneral
Keypad number of keys31
SpeakerphoneYes
Voice codecsG.711, G.722, G.723.1, G.726
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Touchscreen-
Lines quantity2 lines
Phonebook capacity1000 entries
Number of VoIP accounts2
BluetoothNo
Security algorithmsHTTPS, SSL/TLS
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)2.6 W
Operating relative humidity (H-H)10 - 95 %
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals