Yealink SIP-T20P User Manual

User Guide SIP-T20P IP Phone
60
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press .
2. Enter the number you want to forward the incoming call to.
3. Press or .
The LCD screen prompts a call forwarded message.
You can transfer a call to another party in one of the three ways:
 Blind Transfer: Transfer a call directly to another party without consulting.
 Semi-Attended Transfer: Transfer a call when the target phone is ringing.
 Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1. Press during a call.
2. Enter the number you want to transfer the call to.
3. Press again to complete the transfer.
Then the call is connected to the number to which you are transferring.
To perform a semi-attended transfer:
1. Press during a call.
2. Enter the number you want to transfer the call to.
3. Press or to dial out.
4. Press to complete the transfer when receiving ringback.
To perform an attended transfer:
1. Press during a call.
2. Enter the number you want to transfer the call to.
Tran: 1234
123
FWD: 1234
123

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g