Yealink SIP-T20P User Manual

Customizing Your Phone
25
6. Press to add a new contact.
7. Press to switch the input mode.
8. Enter the Name and the Office, Mobile or Other numbers.
9. Press or to select the desired account from the Account field. If Auto is
selected, the phone will use the first available account when placing calls to the
contact from the local directory.
10. Press or to select the desired ring tone from the Ring Tones field.
11. Press to accept the change.
Note
Adding Contacts from Call History
To add a contact to the local directory from the call history:
1. Press .
2. Press or to select the desired entry.
3. Press .
4. Press to switch the input mode, and enter the contact name in the Name field.
5. Press to accept the change.
The entry is successfully saved in the local directory.
To edit a contact in the local directory:
1. Press .
2. Select Local Directory->Contact List.
3. Press or to select Enter and then press .
If the contact has existed in the directory, the LCD screen prompts ―Name exists in
contactlist!‖.
1. Name:
abc
1. Name: Empty
abc

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g