Yealink SIP-T20P - Answering Calls

Customizing Your Phone
37
Key Type (Private Hold)
Usage:
1. Press the DSS key when there is an active call on the shared line.
The active call is placed on private hold.
2. Press the DSS key again to retrieve the private held call.
Note
Zero Touch
You can use this key feature to configure the network parameters quickly.
Dependencies: Type (Key Event)
Key Type (Zero Touch)
Usage:
1. Press the DSS key to access the zero touch screen.
2. Press within a few seconds.
3. Configure the network parameters in the corresponding fields.
4. Press .
The phone will reboot to update configurations.
Keypad Lock
You can use this key feature to immediately lock the keypad of your phone instead of
long pressing . For more information, refer to Keypad Lock on page 20.
Dependencies: Type (Keypad Lock)
Usage: Press the DSS key to immediately lock the keypad of your phone instead of long
pressing .
You can customize the navigation keys, HOLD, CONF, TRAN keys on the keypad.
To customize the programmable keys via web user interface:
1. Click on Phone->DSS Keys->Programmable Keys>>.
2. Customize specific features for these keys.
3. Click Confirm to accept the change.
Note
You can configure the programmable keys via web user interface only.
When the DSS key is used in the private line, it performs the same as the HOLD key
during a call.