Yealink SIP-T20P User Manual

User Guide SIP-T20P IP Phone
48
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free speakerphone mode:
Do one of the following:
- Press .
- With the handset on-hook and headset mode deactivated, press .
- With the handset on-hook and headset mode deactivated, press the line key (the
line LED flashes green).
To answer a call using the headset:
Do one of the following:
- Press .
- With the headset mode activated, press .
- With the headset mode activated, press the line key (the line LED flashes green).
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the
following:
- Press .
The incoming call is answered and the original call is placed on hold.
- Press to access the new call.
Press .
The incoming call is answered and the original call is placed on hold.
To end a call:
Do one of the following:
- If you are using the handset, hangs up the handset or press .
- If you are using the headset, press .
- If you are using the speakerphone, press or .
Note
To end a call placed on hold, you should press the HOLD key to resume the call firstly
before ending it.

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g