Yealink SIP-T20P User Manual

Basic Call Features
57
3. Press or to select the forwarding type, and then press .
4. Depending on your selection:
a.) If you select Always:
1) Press or to select Enable from the Always field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code or off code respectively in the
On Code or Off Code field.
b.) If you select Busy:
1) Press or to select Enable from the Busy field.
2) Enter the destination number you want to forward all incoming calls to
when the phone is busy in the Forward to field.
3) (Optional.) Enter the busy forward on code or off code respectively in the
On Code or Off Code field.
c.) If you select No Answer:
1) Press or to select Enable from the No Answer field.
2) Enter the destination number you want to forward all unanswered incoming
calls to in the Forward to field.
3) Press or to select the ring time to wait before forwarding in the
After duration field (The default ring time is 12 seconds).
4) (Optional.) Enter the no answer forward on code or off code respectively in
the On Code or Off Code field.
5. Press to accept the change.
The icon on the LCD screen indicates that call forward is enabled.
1. Always:
◄ Enable ►
1. Busy:
◄ Enable ►
1. Always:
◄ *Disable ►

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g