Yealink SIP-T20P User Manual

User Guide SIP-T20P IP Phone
84
2. Select Messages->Set Voice Mail.
3. Press or to select the account you want to set.
4. Press to select the proper input mode and then enter the voice mail access
code (e.g. *88).
5. Press to accept the change.
Note
To listen to the voice mails:
1. When the phone user interface prompts receiving new voice mails, press or or
to dial out the voice mail access code.
2. Follow the voice prompt to listen to the voice mails.
Note
To view the voice mail via phone user interface:
1. Press .
2. Select Messages->View Voice Mail.
The phone LCD screen displays the amount of voice mails that includes new or old
voice mails.
3. Select an account and then press to listen to the voice mails.
Voice mail access code must be predefined on the system server. Contact your
system administrator for the more information.
1. Account 1 No. :
*88 123
1. 1234
2 new 1 old Mail
Before listening to the voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the MESSAGE key LED will turn off.

Yealink SIP-T20P Specifications

General

Keypad number of keys	31
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Lines quantity	2 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	2
Bluetooth	No
Security algorithms	HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	2.6 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g