Yealink SIP-T27G - Recall

User Guide for the SIP-T27G IP Phone
108
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Call completion is configurable via web user interface at the path Features->General
Information.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the phone:
1. Press the OK soft key, the phone returns to the idle screen and call completion is activated.
When the called party becomes idle, the following prompt will appear on the LCD screen of the
phone:
1. Press the OK soft key to redial the number.
Note
ReCall
You can press a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select ReCall from the Key Type field.
Call completion is not available on all servers. For more information, contact your system
administrator.
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g