Yealink SIP-T27G - Customizing Your Phone; General Settings; Audio Settings; Contact Management

Getting Started
25
Activating the Wi-Fi Mode
When Wi-Fi USB dongle WF40 is connected to the USB port at the back of the IP phone, the LCD
screen will prompt “Wi-Fi adapter is added, scanning wireless networks?”. You can press the OK soft
key to activate Wi-Fi mode directly and scan Wi-Fi devices automatically.
To activate the Wi-Fi mode via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi.
2. Press or , or the Switch soft key to select On from the Wi-Fi field.
3. Press the Save soft key.
The IP phone scans the available wireless networks in your area.
Connecting to the Wireless Network
Three ways to connect SIP-T27G IP phone to the wireless network:
 Manually connect to an available wireless network
 Wi-Fi Protected Setup (WPS)
 Manually add a wireless network
Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
1. Press Menu->Settings->Basic Settings->Wi-Fi.
2. Press or to highlight X Available Network(s) (X represents the number of
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g