Yealink SIP-T27G - FAC Mode

Basic Call Features
135
If the park retrieve code is already configured for the Retrieve soft key, you don’t need to
configure it when configuring a retrieve park key.
Call park key and retrieve park key are configurable via web user interface at the path
Dsskey->Line Key.
Note
FAC Mode
To configure call park feature in FAC mode via web user interface:
1. Click on Features->Call Pickup.
2. Select FAC from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and the
Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key. This call park code will also apply to the call park key.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
It is configured for the Retrieve soft key. This park retrieve code will also apply to the call
park key.
6. Click Confirm to accept the change.
Note
The call park code and park retrieve code are predefined on the system server. Contact your
system administrator for more information.
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g