Yealink SIP-T27G User Manual

Advanced Phone Features
149
To configure BLF ring type via phone user interface:
1. Press Menu->Settings->Basic Settings->Sound->BLF Ring Type.
2. Press or to select the desired ring tone.
3. (Optional.) Press to adjust the ringer volume.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
BLF ring type is configurable via web user interface at the path Features->Call Pickup.
When the monitored line receives an incoming call, the following occurs on your phone:
 The phone plays a specific ring tone (if enabled).
 The BLF key LED flashes red.
 The caller ID appears on the LCD screen (if enabled).
In the following figure, the LCD screen shows an incoming call from 1077 on the monitored line.
You can do the following actions:
- Press the Pick Up soft key to pick up the call.
- Press the Send soft key to dial out the monitored phone number.
- Press the New Call soft key to place a new call.
- Press the Cancel soft key to exit the screen.
Note
If your phone is locked and the type of the phone lock is configured as Function Keys or All
Keys, you cannot use the Pick Up, Send, New Call and Cancel soft keys until
unlocked. For more
information refer to Phone Lock on page 43.
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g

Yealink SIP-T27G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Gold
Wall mountable	Yes
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
RJ-9 ports quantity	2
USB 2.0 ports quantity	1
Voice codecs	CNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	SIP info
Lines quantity	8 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Bluetooth	-
Security algorithms	AES, MD5
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Volume control	Digital
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm