Yealink SIP-T27G User Manual

Customizing Your Phone
75
 Device Name: the name of the Bluetooth headset.
 MAC: the MAC address of the Bluetooth headset.
Editing Device Information
To edit device information via phone user interface:
1. Press Menu->Settings->Basic Settings->Bluetooth->Edit My Device Information.
The LCD screen displays the device name and MAC address. The MAC address cannot be
edited.
2. Enter the desired name in the Device Name field.
The default device name is “Yealink T27G”.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
The preconfigured Bluetooth device name will display in scanning list of other devices.
Disconnecting the Bluetooth Headset
You can disconnect the Bluetooth headset from your phone. After you disconnect the Bluetooth
headset, it will still remain paired and be displayed in the Paired Bluetooth Device list. So you
can easily connect it to your IP phone again.
To disconnect your Bluetooth headset from your phone:
1. Press Menu->Settings->Basic Settings->Bluetooth->Paired Bluetooth Device.
2. Select the connected Bluetooth headset.
3. Press the Disconnect soft key.
The Bluetooth headset is disconnected. To connect it to your IP phone again, press the
Connect soft key.
https://arttel.ru/
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g

Yealink SIP-T27G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Gold
Wall mountable	Yes
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
RJ-9 ports quantity	2
USB 2.0 ports quantity	1
Voice codecs	CNG, G.711, G.722, G.723.1, G.726, G.729, G.729ab, VAD, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	SIP info
Lines quantity	8 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Bluetooth	-
Security algorithms	AES, MD5
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Volume control	Digital
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm