Basic Call Features
97
To use auto redial:
When the called party is busy, the following prompt will appear on the LCD screen of the phone:
1. Press the OK soft key to activate auto redial. The following prompt will appear on the LCD
screen of the phone:
2. Wait for the designated period of time or press the OK soft key to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
Call Completion
You can use call completion to notify the caller who failed to reach a desired party when the
party becomes available to receive a call.
To configure call completion via phone user interface:
1. Press Menu->Features->Call Completion.
2. Press or , or the Switch soft key to select Enabled from the Call Completion
field.
To Next Page
Loading...
