Yealink SIP-T27P User Manual

User Guide for the SIP-T27P IP Phone
92
You can press or to switch between calls, and then press the Resume soft key to
retrieve the desired call.
Note
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
 Using the handset
 Using the speakerphone
 Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free (speakerphone) mode:
Do one of the following:
- Press .
- With the handset on-hook and the headset mode deactivated, press the Answer soft key.
- With the handset on-hook and the headset mode deactivated, press the line key with the
fast-flashing green LED indicator.
To answer a call using the headset:
Do one of the following:
- Press .
- With the headset mode activated, press the Answer soft key.
- With the headset mode activated, press the line key with the fast-flashing green LED
You can reject incoming calls by pressing the X key or the Reject soft key. You can also activate
Do Not Disturb mode to ignore the incoming calls without ringing on your phone. For more
information, refer to Do Not Disturb (DND) on page 102.
You can forward incoming calls to someone else by pressing the Forward soft key. For more
information, refer to Call Forward on page 107.
If multiple accounts are registered on the phone, you can first press the desired line key on the
idle screen or press the Line soft key on the dialing screen, and then you can use the selected
account to place a call.

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm