Yealink SIP-T27P

User Guide for the SIP-T27P IP Phone
86
Live Dialpad
You can enable live dialpad feature on the SIP-T27P IP phone, which enables the IP phone to
automatically dial out a phone number without pressing the send key. You can also configure a
delay, and then the phone will dial out the phone number automatically after the designated
period of time.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or the line key. You can also configure a delay, and then the phone will dial out the hotline
number automatically after the designated period of time.
To configure the hotline number via phone user interface:
1. Press Menu->Features->Hot Line.
2. Enter the desired number in the Hotline Number field.
3. Enter the delay time in the Hotline Delay field.
Live dialpad is configurable via web user interface only.