Customizing Your Phone
45
If Auto is selected, this group will use the ring tone according to the priority: Contact ring
tone (refer to Adding Contacts) >Account ring tone (refer to Ring Tones) >Phone ring tone
(refer to Ring Tones). If a specific ring tone is selected, this group will use the ring tone
according to the priority: Contact ring tone (refer to Adding Contacts) >Group ring tone.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
Editing Groups
To edit a group in the local directory:
1. Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 42), press
Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group.
3. Press the Option soft key, and then select Detail from the prompt list.
4. Press or to highlight the group information and then edit.
To Next Page
Loading...
