EasyManuals Logo
Home>Yealink>IP Phone>SIP-T27P

Yealink SIP-T27P User Manual

Yealink SIP-T27P
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #154 background imageLoading...
Page #154 background image
User Guide for the SIP-T27P IP Phone
142
Configuring Transfer Mode on DSS Key
When there is an active call on the IP phone, you can handle the active call differently using a
BLF key. The phone behavior depends on the configuration of transfer mode via Dsskey with the
BLF key.
To configure the transfer mode on DSS key via web user interface:
1. Click on Features->Transfer.
2. Select the desired transfer mode from the pull-down list of Transfer Mode via Dsskey.
If you select Blind Transfer, press the BLF key to blind transfer the call to the
monitored user.
If you select Attended Transfer, press the BLF key to dial out the monitored phone
number and then perform an attended or a semi-attended transfer.
If you select New Call, press the BLF key to place a new call to the monitored user.
The original call is placed on hold.
3. Click Confirm to accept the change.
Note
Using BLF Feature on the IP Phone
You can use the BLF key in the following ways:
Place a call to the monitored user.
Transfer a call to the monitored user.
Pick up an incoming call of the monitored user.
Placing a Call to the Monitored User
You can press a BLF key to dial out the monitored phone number when the monitored line is
idle.
Transfer Mode on DSS Key is also applicable to BLF list feature.

Table of Contents

Other manuals for Yealink SIP-T27P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27P and is the answer not in the manual?

Yealink SIP-T27P Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorCappuccino, Black
Backlight keypadYes
Volume controlDigital
Base station keys36
Number of programmable keys8
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal3.66 \
Display resolution240 x 120 pixels
Networking standardsIEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity2
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm
Package depth225 mm
Package width300 mm
Package height118 mm

Related product manuals