Basic Call Features
101
The line key LED flashes green. The LCD screen indicates that the call is on hold.
Note
To resume a held call:
1. Press or the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press or to switch between the calls, and then press or the Resume soft
key to retrieve the desired call.
- Press the corresponding line key to retrieve the call.
If more than two calls are on hold, a numbered prompt appears on the LCD screen, for example
"2/4", indicating that this is the second call out of four calls.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold. The
phone ignores engaged audio device (handset or headset) and switches to Speakerphone to play
the hold tone by default.
To Next Page
Loading...
