User Guide for the SIP-T27P IP Phone
104
The LCD screen displays a list of accounts on the phone.
2. You can activate it for a specific account:
1) Press or to select the desired account and then press the Enter soft key.
2) Press or , or the Switch soft key to select Enabled from the DND Status
field.
3) (Optional.) Enter the DND on code or off code respectively in the On Code or Off
Code field.
If the on code or off code is configured, the IP phone will send the corresponding
code to activate or deactivate DND on the server. It is not available on all servers.
You can also activate DND for all accounts:
1) Do the following:
- Press the All On soft key if DND on code and off code are not needed on your
server.
- After DND was activated for a specific account on the step 2, press or
to highlight the DND Status field.
Press the All Lines soft key. The LCD screen prompts “Copy to all lines?”.
Press the OK soft key to accept the change or the Cancel soft key to cancel.
3. Press the Save soft key to accept the change.