Yealink SIP-T27P User Manual

User Guide for the SIP-T27P IP Phone
124
phone in the system (for example, a phone in another office or conference room). You can park
an active call by pressing the Park soft key or call park key (if configured) on the phone. If the
call is parked successfully, there is a voice prompt confirming that the call was parked. You can
retrieve the parked call by pressing the Retrieve soft key or the retrieve park key (if configured).
If the parked call is not retrieved within a period of time defined by the system, the phone performing
call park will receive the call back.
Note
The IP phone supports call park feature under the following modes:
 FAC mode: park the call to the local extension or a desired extension through dialing the
park code.
 Transfer mode: park the call to shared parking lot through performing a blind transfer to
a call park number (call park code).
To configure a call park key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired line key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Call Park from the Key Type field.
5. Press or , or the Switch soft key to select the desired line from the Account ID
field.
6. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
7. (Optional.) Enter the call park code in the Value field.
8. Press the Save soft key to accept the change or the Back soft key to cancel.
If the call park code is already configured for the Park soft key, you don’t need to configure it
when configuring a call park key.
To configure a retrieve park key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired line key.
3. Press or , or the Switch soft key to select Retrieve Park from the Type field.
4. Press or , or the Switch soft key to select the desired line from the Account ID
field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. (Optional.) Enter the park retrieve code in the Value field.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
Call park is not available on all servers. Contact your system administrator for more information.

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm