EasyManuals Logo

Yealink SIP-T27P User Manual

Yealink SIP-T27P
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
User Guide for the SIP-T27P IP Phone
126
To park a call in FAC mode:
1. During a call, press the Park soft key (You may need to press the More soft key to see the
Park soft key) or the call park key (if configured).
- If the call park code is not configured, you need to enter the call park code (e.g., *68).
Press , or the Park soft key.
- If the call park code is configured, the phone will dial the configured call park code
shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension (e.g., 4606) where you want to park the call.
2) Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
- If the park retrieve code is configured, press the Retrieve soft key on the dialing

Table of Contents

Other manuals for Yealink SIP-T27P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27P and is the answer not in the manual?

Yealink SIP-T27P Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorCappuccino, Black
Backlight keypadYes
Volume controlDigital
Base station keys36
Number of programmable keys8
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal3.66 \
Display resolution240 x 120 pixels
Networking standardsIEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity2
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm
Package depth225 mm
Package width300 mm
Package height118 mm

Related product manuals