EasyManuals Logo

Yealink SIP-T27P User Manual

Yealink SIP-T27P
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #188 background imageLoading...
Page #188 background image
User Guide for the SIP-T27P IP Phone
176
If phone A has more than one call, do the following:
1. Long press the desired line key on phone B.
The list of calls appears on the LCD screen of phone B.
2. Press or to select the active call.
The Cancel, Call Pull, New Call and Barge In soft keys appear when the active call is
highlighted.
3. Press the Barge In soft key to interrupt the active call of phone A.
Party B may hear a warning tone and then set up a conference call with the other parties of
the active call.
4. Press , the Hold or the End Call soft key.
- If any party in the conference call presses , the Hold soft key, two-way voice can
be heard between the remaining parties.
- If party A or party B presses the End Call soft key, the remaining parties are still
connected. If the other party (not the shared line party) presses the End Call soft key,
the conference call is ended.
Call Pull
Call pull feature allows users to retrieve an existing call from another shared phone that is in
active or hold status. For example, when there is a call between phone A and phone C, you can
use call pull feature on phone B to retrieve this call from phone A. Then the call is established
between phone B and phone C.

Table of Contents

Other manuals for Yealink SIP-T27P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T27P and is the answer not in the manual?

Yealink SIP-T27P Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorCappuccino, Black
Backlight keypadYes
Volume controlDigital
Base station keys36
Number of programmable keys8
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal3.66 \
Display resolution240 x 120 pixels
Networking standardsIEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity2
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth210 mm
Width265 mm
Height170.5 mm
Package depth225 mm
Package width300 mm
Package height118 mm

Related product manuals