Yealink SIP-T27P

User Guide for the SIP-T27P IP Phone
28
The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Note
Enabling the Power Saving
To enable the power saving feature via web user interface:
1. Click on Settings->Power Saving.
2. Select Enabled from the pull-down list of Power Saving.
3. Click Confirm to accept the change.
Configuring the Office Hour
Office Hour specifies the starting time and ending time in the office each day.
To configure the office hour via web user interface:
1. Click on Settings->Power Saving.
Power saving is configurable via web user interface only.