Yealink SIP-T27P User Manual

Customizing Your Phone
73
 When the transfer mode on DSS key is New Call, press the Transfer key to place a new call
to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Usage:
1. Press the Hold key during an active call to place the call on hold.
2. Press the Hold key again to retrieve the held call.
DND
You can use this key feature to activate or deactivate DND. You can also use this key feature to
access the custom DND screen. For more information, refer to Do Not Disturb (DND) on page
102.
Dependencies: Type (Key Event)
Key Type (DND)
Label (key label displayed on the LCD screen)
Usage:
When DND is in phone mode:
1. Press the DND key to activate DND.
2. Press the DND key again to deactivate DND.
When DND is in custom mode:
1. Press the DND key to access the Custom DND screen. You can activate or deactivate DND
for one or all accounts.
Note
SMS
You can use this key feature to quickly access text message. For more information, refer to Short
Message Service (SMS) on page 183.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
If the Value field is left blank, the Transfer key performs the same as the TRAN key or the
Transfer soft key during a call. For more information, refer to Call Transfer on page 115.
When DND is activated, the DND key LED will illuminate solid green, and the incoming calls will
be rejected automatically.

Yealink SIP-T27P Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Cappuccino, Black
Backlight keypad	Yes
Volume control	Digital
Base station keys	36
Number of programmable keys	8
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.722, G.726, G.711, G.729, G.711a, G.729A, iLBC, G.729B
Display diagonal	3.66 \
Display resolution	240 x 120 pixels
Networking standards	IEEE 802.1p, IEEE 802.3af, IEEE 802.1x, IEEE 802.1Q
RJ-9 ports quantity	2
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	210 mm
Width	265 mm
Height	170.5 mm
Package depth	225 mm
Package width	300 mm
Package height	118 mm