Basic Call Features
133
You can also enter the number using the on-screen keypad.
3. Press , , or tap Send.
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to the Key As Send on page 59.
You can also tap the History soft key or the Directory soft key to search for an entry or contact
after picking up the handset, and then tap the desired entry or contact to place a call.
Note
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press or tap the line key to obtain a dial tone.
Enter the desired number.
Press , or tap Send.
- With the handset on-hook, enter the desired number.
Press , , or tap Send.
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number.
Press , , or tap Send.
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, press the
OK key when the phone is idle. The maximum SIP URI or IP address length is 32 characters. For
example, SIP URI: 3606@sip.com, IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
To Next Page
Loading...
Need help?
General
Weight and Dimensions
