Customizing Your Phone
71
7. Tap the desired ring tone.
If Auto is selected, this group will use the ring tone according to the priority: Contact ring
tone (refer to Adding Contacts) >Account ring tone (refer to Ring Tones) >Phone ring tone
(refer to Ring Tones). If a specific ring tone is selected, this group will use the ring tone
according to the priority: Contact ring tone (refer to Adding Contacts) >Group ring tone.
8. Tap OK to accept the change.
You can also edit or delete any newly added contact groups.
Editing Groups
To edit a group in the local directory:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 68), tap
->Directory->All Contacts to enter the local directory.
2. Tap Setting.
To Next Page
Loading...
