Yealink SIP-T48S

User Guide for the SIP-T48S IP Phone
78
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap after the desired contact.
3. Tap the desired field to edit the contact information.
You can tap or to switch the contact you want to edit.
4. Tap the Save soft key to accept the change or to cancel.
Deleting Contacts
To delete a contact from the local directory:
1. Tap .
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 68), tap
->Directory->All Contacts to enter the local directory.
2. Tap after the desired contact.
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap after the desired contact.