User Guide for the SIP-T48S IP Phone
146
To place a call on hold:
1. Press or tap the Hold soft key during a call.
The touch screen indicates that the call is on hold.
Note
To resume a held call:
1. Press or tap the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Tap the desired call, and then press or tap the Resume soft key to retrieve it.
- Tap the desired call, and then tap the corresponding line key to retrieve it.
The phone will beep softly every 30 seconds to remind you that you still have a call on hold. The
phone ignores engaged audio device (handset or headset) and switches to Speakerphone to play
the hold tone by default. The Speakerphone key will light up for 1 second.
To Next Page
Loading...
