EasyManuals Logo

Yealink SIP-T48S User Manual

Yealink SIP-T48S
263 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
User Guide for the SIP-T48S IP Phone
160
If the forward on code or off code is configured, the IP phone sends the corresponding code to
the server when a certain action takes place. For example, if you set the Always Forward on code
to be *71 (may vary on different servers), and the target number to be 1234. When you enable
Always Forward on the IP phone, the IP phone sends *711234 to the server, and then the server
will enable Always Forward feature on the server side, hence being able to get the right status of
the extension.
Call forward is configurable via web user interface at the path Features->Forward&DND.
Note
To configure the forward authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of Forward Emergency.
3. Enter the numbers in the Forward Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is enabled on the phone, the phone cannot forward incoming calls from the
numbers specified in the Forward Authorized Numbers field.
Note
You can also enter the SIP URL or IP address in the Forward to field. For more information on
using the SIP URL or IP address, refer to Placing Calls on page 132.
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different among servers. For more information, contact your system
administrator.
Forward authorized number is configurable via web user interface only.

Table of Contents

Other manuals for Yealink SIP-T48S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48S and is the answer not in the manual?

Yealink SIP-T48S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Display diagonal7 \
Display resolution800 x 480 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Front cameraNo
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Keypad number of keys42
Security algorithmsAES
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, HTTPS
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width266 mm
Height185 mm
Package depth263 mm
Package width324 mm
Package height128 mm

Related product manuals