User Guide for the SIP-T48S IP Phone
172
It is configured for the Retrieve soft key. This park retrieve code will also apply to the
retrieve key.
6. Click Confirm to accept the change.
Note
To park a call in Transfer mode:
1. During a call, tap the Park soft key (You may need to tap the More soft key to see the Park
soft key) or the call park key (if configured).
- If the call park code is not configured, you need to enter the call park code.
Press , or tap Park. The call will be transferred to the shared parking lot.
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
To Next Page
Loading...
