EasyManuals Logo

Yealink SIP-T48S User Manual

Yealink SIP-T48S
263 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
Advanced Phone Features
185
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the desired pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
Configuring Transfer Mode on DSS Key
When there is an active call on the IP phone, you can handle the active call differently
depending on the transfer mode on DSS key.
To configure the transfer mode on DSS key via web user interface:
1. Click on Features->Transfer.
2. Select the desired transfer mode from the pull-down list of Transfer Mode via Dsskey.
If you select Blind Transfer, tap the BLF key to blind transfer the call to the
monitored user.
If you select Attended Transfer, tap the BLF key to dial out the monitored phone
number and then perform an attended or a semi-attended transfer.

Table of Contents

Other manuals for Yealink SIP-T48S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T48S and is the answer not in the manual?

Yealink SIP-T48S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Display diagonal7 \
Display resolution800 x 480 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Front cameraNo
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Keypad number of keys42
Security algorithmsAES
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, HTTPS
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width266 mm
Height185 mm
Package depth263 mm
Package width324 mm
Package height128 mm

Related product manuals