User Guide for the SIP-T48S IP Phone
40
- To enter “A”, press once.
- To enter “B”, press twice quickly.
- To enter “C”, press three times quickly.
- To enter “2ÄÆÅÀÁÂÃÇ”, press more
than three times quickly.
Note: When you are in the uppercase (ABC),
uppercase and lowercase (Abc) or lowercase (abc)
input mode, is not available.
Enter special characters.
Press the keypad key or , or
press .
For Key:
- If it is in the uppercase (ABC soft key),
uppercase and lowercase (Abc soft key) or
lowercase (abc soft key) input mode, it will
provide the space character.
- If it is in the numeric (123 soft key) or
alphanumeric (2aB soft key) input mode, it
will only provide the digit 0.
For key:
- It only provides the pound character #.
For key:
- If it is in the uppercase (ABC), lowercase
(abc), uppercase and lowercase (Abc) or
alphanumeric (2aB) input mode, it will
provide the following special characters:
*.,?!\-()@/:_;+&%=<>£$¥¤[]{}~^¡¿§#"|.
- If it is in the numeric (123) input mode, it will
provide the following special
characters: .*:/@[].
Press or to position the cursor to the
right of the text you want to delete, and then tap
Delete or to delete one character at a time.
Delete an entire field of data.
Swipe your finger to the left or right to select the
entire field of data, so that the data is highlighted,
and then tap the Delete or .
3. Press .
Note
When the phone is on the pre-dialing/dialing screen, characters can be entered using the
on-screen keypad.