User Guide for the SIP-T48S IP Phone
56
This field appears only if Daylight Saving field is selected Automatic, and the default time
zone name is “China(Beijing)”.
7. Tap the Save soft key to accept the change or to cancel.
Note
To configure the time and date manually via phone user interface:
1. Tap ->Basic->Time & Date->General.
2. Tap the gray box of the Type field, and then select Manual Settings from the pull-down
list.
3. Enter the specific date and time in the corresponding fields.
4. Tap the Save soft key to accept the change.
The time and date displayed on the touch screen will change accordingly.
Please refer to Appendix A – Time Zones on page 247 for the list of available time zones on the
IP phone.
To Next Page
Loading...
