Yealink T42S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
142
Default
0
Parameter
phone_setting.called_party_info_display.enable
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the identity of the callee when it receives
an incoming call.
Note: The information display method is configured by the parameter
“phone_setting.call_info_display_method”.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings->Call Display->Display Called Party Information
Parameter
phone_setting.call_info_display_method
<y0000000000xx>.cfg
Description
It configures the call information display method when the IP phone receives an
incoming call, dials an outgoing call or is during an active call.
Permitted
Values
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
5-Null
Default
0
Web UI
Settings->Call Display->Call Information Display Method
Parameter
phone_setting.incoming_call.horizontal_roll_interval
<y0000000000xx>.cfg
Description
It configures the interval (in milliseconds) for the IP phone to horizontally scroll the
caller information when the phone is ringing.
Permitted
Values
Integer from 100 to 2000
Default
500
Parameter
account.X.update_ack_while_dialing
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to update the display of call ID according to the
ACK message.
Note: It works only if “account.X.refresh_remote_id.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0