Yealink T42S

Phone Network
45
802.1x Authentication
Yealink IP phones support the following protocols for 802.1X authentication:
 EAP-MD5
 EAP-TLS (requires Device and CA certificates, requires no password)
 EAP-PEAP/MSCHAPv2 (requires CA certificates)
 EAP-TTLS/EAP-MSCHAPv2 (requires CA certificates)
 EAP-PEAP/GTC (requires CA certificates)
 EAP-TTLS/EAP-GTC (requires CA certificates)
 EAP-FAST (supports EAP In-Band provisioning, requires CA certificates if the provisioning method is
Authenticated Provisioning)
For more information on 802.1X authentication, refer to Yealink 802.1X Authentication.
Topic
802.1x Authentication Configuration
802.1x Authentication Configuration
The following table lists the parameters you can use to configure 802.1x authentication.
Parameter
static.network.802_1x.mode
[1]
<y0000000000xx>.cfg
Description
It configures the 802.1x authentication method.
Permitted
Values
0-EAP-None, 802.1x authentication is not required.
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
7-EAP-FAST
Default
0
Web UI
Network->Advanced->802.1x->802.1x Mode
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->802.1x->802.1x Mode
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)