Yealink T42S

Phone Customization
189
The following table lists the parameters you can use to configure EDK.
Parameter
features.enhanced_dss_keys.enable
<y0000000000xx>.cfg
Description
It enables or disables the Enhanced DSS Keys (EDK) feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
edk.id_mode.enable
<y0000000000xx>.cfg
Description
It enables or disables to view the softkey or menu item ID by long pressing the
Volume Up key for three seconds on any screen.
Note: The menu item id displays on the status bar of the phone. Long pressing the
Volume Up key again for three seconds to exit. It works only if
“features.enhanced_dss_keys.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
EDK List Configuration
Using the Enhanced DSS Keys (EDK) List parameters to define a macro is useful when defining more than
one soft key or DSS key.
The following table lists the parameters you can use to configure EDK list.
Parameter
edk.edklist.X.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables Enhanced DSS Keys (EDK) macro X.
Note: It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled