Yealink T42S - Page 215

Phone Customization
195
state.
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.on_talk
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the talk state.
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.call_failed
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the call failed state.
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.ring_back
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the ring back state.
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.transfer_ring_back
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the transfer ring back
state.
Note: It works only if the values of the parameters
“features.enhanced_dss_keys.enable” and “softkey.X.enable” are set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled