Yealink T42S

Audio Features
363
Example:
account.1.ringtone.ring_type = Ring3.wav
It means configuring Ring3.wav for account1.
account.1.ringtone.ring_type = Common
It means account1 will use the ring tone selected for the IP phone configured by the
parameter "phone_setting.ring_type".
Permitted
Values
Common, Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav,
Ring7.wav, Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (for example,
Customring.wav)
Default
Common
Web UI
Account->Basic->Ring Type
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Sound->Ring Tones->AccountX
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Basic Settings->Sound->Ring Tones->AccountX
Parameter
ringtone.url
<y0000000000xx>.cfg
Description
It configures the access URL of the custom ring tone file.
Example:
ringtone.url = tftp://192.168.1.100/Customring.wav
Permitted
Values
URL within 511 characters
Default
Blank
Web UI
Settings->Preference->Upload Ringtone
Parameter
ringtone.delete
<y0000000000xx>.cfg
Description
It deletes all custom ring tone files.
Example:
ringtone.delete = http://localhost/all
Permitted
Values
http://localhost/all
Default
Blank
Parameter
phone_setting.ringing_timeout
<y0000000000xx>.cfg
Description
It configures the duration time (in seconds) in the ringing state.
If it is set to 180, the phone will stop ringing if the call is not answered within 180
seconds.