Yealink T42S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
378
Default
Blank
Web UI
Settings->Tones->Info
Parameter
voice.tone.stutter
<y0000000000xx>.cfg
Description
It customizes the tone when the IP phone receives a voice mail.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings->Tones->Stutter
Parameter
voice.tone.message
<y0000000000xx>.cfg
Description
It customizes the tone when the IP phone receives a text message.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings->Tones->Message
Parameter
voice.tone.autoanswer
<y0000000000xx>.cfg
Description
It customizes the warning tone for auto answer.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if “voice.tone.country” is set to Custom. If you want to disable this
warning tone, set it to 0.
Permitted
Values
String
Default
Blank
Web UI
Settings->Tones->Auto Answer