Troubleshooting
530
keys->BLF List keys.
If only one type is configured, the configured type will have the highest priority. For
example, “blf_list” means the IP phone preferentially display the BLF List keys, and
remaining keys’ display order is : UC Favorite keys->Favorite keys (the default order).
Note: If Auto Linekeys feature is enabled (features.auto_linekeys.enable = 1), the Line
keys (the line key type is configured as Line) will be shown first.
Blank (the display order: BLF List keys->UC Favorite keys->Favorite keys)
blf_list, uc_favorite, favorite or a combination of them
features.uc_dir.match_tail_number
It configures the minimum matched digits of the tail numbers of BroadCloud Buddy.
When entered number matches the tail numbers of a buddy in the buddy directory,
the IP phone will automatically display the matched results on the LCD screen when
placing a call.
If it is set to 0, the entered number must exactly match the number of BroadCloud
Buddy.
If it is set to other values (for example, 4), the entered number less than 4 digits would
not match with the BroadCloud contact.
Example:
If there is a BroadCloud Buddy name “Sunmy” with phone number “785656” and the
parameter “features.uc_dir.match_tail_number” is set to “4”, “5656”, “85656” or
“785656” would match “Sunmy (785656)”. “656”, “56” or “6” would not match “Sunmy
(785656)”.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Integer greater than or equal to 0
search_in_dialing.bw_uc_buddies.enable
It enables or disables the IP phone to automatically search entries from the BroadSoft
Buddies directory, and display results on the pre-dialing/dialing screen.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
search_in_dialing.bw_uc_buddies.priority
It configures the search priority of the BroadSoft Buddies directory.
To Next Page
Loading...
