Yealink T54S

Phone Customization
143
Parameter
account.X.refresh_remote_id.enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to update the identity of the caller according to the
request message from the remote party.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
sip.disp_incall_to_info
[2]
<y0000000000xx>.cfg
Description
It enables or disables the phone to display the identity contained in the To field of the
INVITE message when it receives an incoming call.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Display Method on Dialing
When the IP phone is on the pre-dialing or dialing screen, the account information will be displayed on
the LCD screen.
Yealink IP phones support three display methods: Label, Display Name and User Name. You can
customize the account information to be displayed on the IP phone as required.
Topic
Display Method on Dialing Configuration
Display Method on Dialing Configuration
The following table lists the parameters you can use to configure display method on dialing.
Parameter
features.caller_name_type_on_dialing
<y0000000000xx>.cfg
Description
It configures the selected line information displayed on the pre-dialing or dialing