Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
374
 Switzerland
 Sweden
 Russia
 United States
 Chile
 Czech ETSI
Configured tones can be heard on IP phones in the following conditions.
Condition
Description
Dial
When in the dialing interface
Secondary Dial
When adding a comma “,” to the digit map (For more
information on digit map, refer to Dial Plan Defined by
Digit Map)
Ring Back
Ring-back tone
Busy
When the callee is busy
Congestion
When the network is congested
Call Waiting
Call waiting tone (For more information on call
waiting, refer to Call Waiting)
Dial Recall
When receiving a call back
Info
When receiving a special message
Stutter
When receiving a voice mail (For more information on
voice mail tone, refer to Alert Tone)
Message
When receiving a text message (For more information
on text message, refer to Alert Tone)
Auto Answer
When automatically answering a call (For more
information on auto answer, refer to Auto Answer)
Tones Configuration
The following table lists the parameters you can use to configure tones.
Parameter
voice.tone.country
<y0000000000xx>.cfg
Description
It configures the country tone for the IP phone.
Example:
voice.tone.country = Custom