Yealink T54S

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
442
Topics
Call Park and Retrieve Configuration
Example: Setting Call Park and Retrieve in FAC Mode
Example: Setting Call Park and Retrieve in Transfer Mode
Call Park and Retrieve Configuration
The following table lists the parameters you can use to configure call park and retrieve.
Parameter
features.call_park.park_mode
<y0000000000xx>.cfg
Description
It configures the call park mode.
Permitted
Values
1-FAC, park a call through dialing the call park code.
2-Transfer, blind transfer the call to a shared parking lot.
Default
2
Web UI
Features->Pick up & Park->Call Park Mode
Parameter
features.call_park.enable
<y0000000000xx>.cfg
Description
It enables or disables the user to use Park and Retrieve soft keys when performing
call park feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the Park soft key during a call, and display the
Retrieve soft key on the Dialing screen.
Default
0
Web UI
Features->Pick up & Park->Call Park
Parameter
features.call_park.park_code
<y0000000000xx>.cfg
Description
It configures the call park code for FAC call park mode, or configures shared parking
lot for Transfer call park mode.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features->Pick up & Park->Call Park Code
Parameter
features.call_park.park_retrieve_code
<y0000000000xx>.cfg
Description
It configures the park retrieve code for FAC call park mode, or configures retrieve
parking lot for Transfer call park mode.
Permitted
Values
String within 32 characters