Yealink T54S

Account Settings
227
 If the DNS query returns a result, the IP phone will use the returned record from the DNS server and
ignore the statically configured cache values.
When the IP phone is not configured with a DNS server, it will behave as follows:
 The IP phone attempts to resolve the domain name within the static DNS cache.
 The IP phone will always use the results returned from the static DNS cache.
Static DNS Cache Configuration
The following table lists the parameters you can use to configure static DNS cache.
Parameter
account.X.dns_cache_type
[1]
<MAC>.cfg
Description
It configures whether the IP phone uses the DNS cache for domain name resolution of
the SIP server and caches the additional DNS records.
Permitted
Values
0-Perform real-time DNS query rather than using DNS cache.
1-Use DNS cache, but do not record the additional records.
2-Use DNS cache and cache the additional DNS records.
Default
1
Parameter
account.X.static_cache_pri
[1]
<MAC>.cfg
Description
It configures whether preferentially to use the static DNS cache for domain name
resolution of the SIP server.
Permitted
Values
0-Use domain name resolution from server preferentially
1-Use static DNS cache preferentially
Default
0
Parameter
dns_cache_naptr.X.name
[2]
<y0000000000xx>.cfg
Description
It configures the domain name to which NAPTR record X refers.
Example:
dns_cache_naptr.1.name = yealink.pbx.com
Permitted
Values
Domain name
Default
Blank
Parameter
dns_cache_naptr.X.order
[2]
<y0000000000xx>.cfg
Description
It configures the order of NAPTR record X.
NAPTR record with lower order is more preferred.
Example:
dns_cache_naptr.1.order = 90