Yealink T54S - Page 189

Phone Customization
169
Phone UI
Menu->Features->DSS Keys->Line Key X->Type
Parameter
linekey.X.line
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the line key feature.
Note: You do not need to configure this parameter when “linekey.X.type” is set to 1, 2,
3, 4, 5, 6, 7, 8, 9, 11, 17, 18, 20, 22, 24, 25, 27, 34, 35, 38, 39, 40, 41, 42, 45, 50, 61, 66 or
73”. It is not applicable to T19(P) E2 IP phones.
Permitted
Values
T54S/T48S/T48G/T46S/T46G/T29G: 1-16;
T52S/T42S/T42G: 1-12;
T41S/T41P/T27P/T27G: 1-6;
T40P/T40G/T23P/T23G: 1-3
T21(P) E2: 1-2
Default
1
Web UI
Dsskey->Line Key->Line KeyX->Line
Phone UI
Menu->Features->DSS Keys->Line Key X->Account ID
Parameter
linekey.X.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some line key features.
For example, When you assign the Speed Dial to the line key, this parameter is used to
specify the number you want to dial out.
Note: You do not need to configure this parameter when “linekey.X.type” is set to 4, 5,
7, 8, 18, 20, 22, 25, 34, 38, 39, 41, 42, 45, 50, 61 or 66. It is not applicable to T19(P) E2 IP
phones.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Dsskey->Line Key->Line KeyX->Value
Phone UI
Menu->Features->DSS Keys->Line Key X->Value
Parameter
linekey.X.label
[1]
<y0000000000xx>.cfg
Description
It configures the label displayed on the LCD screen.
This is an optional configuration.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Dsskey->Line Key->Line KeyX->Label