Yealink T54S

Account Settings
219
Description
It configures the registration mode in fallback mode.
Note: It is not applicable to outbound proxy servers.
Permitted
Values
0-Concurrent registration
1-Successive registration
Default
0
Parameter
account.X.fallback.timeout
[1][2]
<MAC>.cfg
Description
It configures the time interval (in seconds) for the IP phone to detect whether the
working server is available by sending the registration request after the fallback server
takes over call control.
Note: It is not applicable to outbound proxy servers.
Permitted
Values
Integer from 10 to 2147483647
Default
120
Parameter
account.X.outbound_proxy_fallback_interval
[1][2]
<MAC>.cfg
Description
It configures the time interval (in seconds) for the IP phone to detect whether the
working outbound proxy server is available by sending the registration request after
the fallback server takes over call control.
Note: It is only applicable to outbound proxy servers.
Permitted
Values
Integer from 0 to 65535
Default
3600
Web UI
Account->Register->Proxy Fallback Interval
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Accounts->Account X->Proxy Fallback
Interval
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings->Accounts->Proxy Fallback Interval
Parameter
account.X.redundancy_with_reg_fail.enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to send the request to the next server when failing
to register an account.
Note: It works only if “account.X.fallback.redundancy_type" is set to 1 (Successive
registration).
Permitted
Values
0-Disabled. Only if the working server does not respond, will the IP phone send the
request to the next server.
1-Enabled