Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
234
Note: The number of the line keys is determined by “account.X.number_of_linekey”. It
is not applicable to T19(P) E2 IP phones.
Features->General Information->Auto Linekeys
account.X.number_of_linekey
[1]
It configures the number of line keys to be assigned with a specific account from the
first unused one. If a line key is in used, the IP phone will skip to the next unused DSS
key.
Note: It is not applicable to T19(P) E2 IP phones.
Integer from 1 to 999
The number of the line keys varies by phone models, for the supported line keys, refer
to Supported DSS Keys.
Account->Advanced->Number of line key
phone_setting.call_appearance.transfer_via_new_linekey
It enables or disables to distribute a transferring call to a new line key (the new line
key is not seized). If all line keys are seized, the current line key will be used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”.
The value configured by the parameter
“account.X.phone_setting.call_appearance.transfer_via_new_linekey” takes precedence
over that configured by this parameter. It is not applicable to T19(P) E2 IP phones.
0-Disabled, the IP phone will transfer a call on the current line key.
1-Enabled
account.X.phone_setting.call_appearance.transfer_via_new_linekey
[1]
It enables or disables to distribute a transferring call to a new line key (the new line
key is not seized) for account X. If all line keys are seized, the current line key will be
used.
Note: The number of the line keys is determined by “account.X.number_of_linekey”.
The value configured by this parameter takes precedence over that configured by the
parameter “phone_setting.call_appearance.transfer_via_new_linekey”. It is not
applicable to T19(P) E2 IP phones.
0-Disabled, the IP phone will transfer a call on the current line key.
1-Enabled
To Next Page
Loading...
