Call Features
287
It configures the behavior when an impossible digit map match occurs.
Note: It works only if “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.no_match_action” takes precedence over that
configured by this parameter.
0-prevent users from entering a number and immediately dial out the entered
numbers
1-the dialing will fail and the LCD screen will prompt “Forbidden Number”
2-allow users to accumulate digits and dispatch call manually with the send key or
automatically dial out the entered number after a certain period of time configured by
the parameter “dialplan.digitmap.interdigit_long_timer”
dialplan.digitmap.active.on_hook_dialing
It enables or disables the entered numbers to match the predefined string of the digit
map in real time. It is only applicable to the on-hook dialing.
Note: It works only if “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.active.on_hook_dialing” takes precedence
over that configured by this parameter.
dialplan.digitmap.apply_to.on_hook_dial
It enables or disables the entered number to match the predefined string of the digit
map after pressing a send key when dialing on-hook or pressing the DSS key (for
example, speed dial, BLF or prefix key).
Note: It works only if “dialplan.digitmap.enable” or
“account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The value configured by the
parameter “account.X.dialplan.digitmap.apply_to.on_hook_dial” takes precedence over
that configured by this parameter.
dialplan.digitmap.apply_to.directory_dial
It enables or disables the digit map to be applied to the numbers dialed from the
directory.
Note: It works only if “dialplan.digitmap.enable” or
To Next Page
Loading...
