Yealink T54S

Phone Network
11
Permitted
Values
0-DHCP
1-Static IP Address
Default
0
Web UI
Network->Basic->IPv6 Config
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv6
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN
Port->IPv6
Parameter
static.network.ipv6_internet_port.ip
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 address.
Example:
static.network.ipv6_internet_port.ip = 2026:1234:1:1:215:65ff:fe1f:caa
Note: It works only if “static.network.ip_address_mode” is set to 1 (IPv6) or 2 ( IPv4 &
IPv6), and "static.network.ipv6_internet_port.type" is set to 1 (Static IP Address).
Permitted
Values
IPv6 Address
Default
Blank
Web UI
Network->Basic->IPv6 Config->Static IP Address->IP Address
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv6->Static
IP->IP Address
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN
Port->IPv6->Static IPv6 Client->IP Address
Parameter
static.network.ipv6_prefix
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 prefix.
Note: It works only if “static.network.ip_address_mode” is set to 1 (IPv6) or 2 (IPv4 &
IPv6), and "static.network.ipv6_internet_port.type" is set to 1 (Static IP Address).
Permitted
Values
Integer from 0 to 128
Default
64
Web UI
Network->Basic->IPv6 Config->Static IP Address->IPv6 Prefix(0~128)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv6->Static